Vessels, Machinery, Plant and equipment for sale

Timsa (formely Achus II, Bahrain)

Hydroland Cutter Section Dredger.

Date of first registration: 1981
Current spud legs:  8- 10metres
Engine: Cummins 365 hp
Generator: Lombardini 25KvA
HIAB mounted on deck
8 man life raft
Length: 27metres
Breadth: 6metres
Draft: 0.75metre
Pump: 10’’ Warman gravel pump
Centrally controlled mooring system with winches
Hydraulic Proplusion system 200HP
Construction – 3 x sectional steel pontoons with central bridge and engine housing
The dredger is currently lying at Marina Banda Al Rowdha, Muscat.
It has been dismantled into its different pontoon sections as a dry docking exercise.
The pontoons have been hydro blasted to metal and using Hempel paints a three coat system has been applied using specialist primer paint and epoxy paints.
The engine prior to sale will have an oil change and new filters.
The pictures that follow are from the current dry dock facility and also from its last dredging job.

The picture below was taken while the dredger was on a project in Oman dredging a fishing harbour to -5CD.

Hiab crane is just visible

On each of the two main pontoons there is a storage area that descends into the deck. The entrance of the one on the Left is a tool store room. In the background of the right hand photo there is the larger deck structure which descends into the pontoon and provides a store room and (basic) crew room. This has more recently only been used as a spare parts store.

The engine housing with Cummins Engine           
The rear of the engine housing and the rear generator (25KvA) This has recently been renovated.
The Control panel in the bridge

This picture shows the discharge pressure after in region of 300 metres. They are 8 inch hoses.
To be sold with the machine are five floating hoses and 12 sinking hoses (rubber), all 8 inch. They are 12 metres long each.

The following photographs show the current condition of the pontoons and dredge parts as they have been prepared and in its separate pieces.